Engine - Information on Remanufactured Cylinder Heads
BULLETIN NO.: 886104ISSUE DATE: November, 1998
GROUP/SEQ. NO.: Engine-07
CORPORATION NO.: 886104
SUBJECT:
Information on Remanufactured Cylinder Head Assemblies Available for Service
MODELS AFFECTED:
1991 - 1998 Saturn vehicles
PURPOSE:
The purpose of this bulletin is to provide information on remanufactured cylinder head assemblies available for service that allow for reduced repair cost and reduced labor time when replacing machined cylinder heads.
The remanufactured cylinder head assemblies consist of the following components:
^ Machined Cylinder Head
^ Exhaust Valves
^ Intake Valves
^ Exhaust Manifold Studs
^ Intake Manifold Studs
^ Spark Plugs
^ Valve Stem Oil Seals
^ Cylinder Head Oil Gallery Plugs
^ Valve Springs
^ Camshaft Bearing Hole Plugs (SOHC)
^ Valve Spring Caps
^ Cylinder Head Water Jacket Hole Plug (DOHC)
^ Valve Stem Keys Water Outlet Washer (DOHC)
The following table lists the part numbers for the remanufactured cylinder head assemblies:
Note:
Cylinder Head Assembly cores must be returned like all cores in the core return program (visible and complete yellow core tag attached to failed assembly, all bearing caps attached to DOHC cylinder heads, core in original bag and box, properly completed packing slip and Core Return Receipt form). Please refer to Core Return Instructions in Section 9 of the Parts Policies and Procedures Manual for further core return information.
CLAIM INFORMATION:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System as shown.