Fuse Circuits Testing

IGN3 Fuse
Location: Underhood junction block
Type: 30A Maxifuse
Feeds: Circuit 102A
If one of the following systems is operating normally, the fuse is most likely good.
- HVAC blower motor
- Rear defogger
- ABS
- Generator
- Cruise control
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good go to the next item indicated on the Complaint-Condition Chart.

IGN3 Fuse
Location: I/P junction block
Type: 7.5A Minifuse
Feeds: Window relay
If one of the following systems is operating normally, the fuse is most likely good.
- Generator
- A/C
- DRL
- Power windows
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good go to the next item indicated on the Complaint-Condition Chart.
If one of the following systems is operating normally the fuse is most likely good.

PWR CONVCE Fuse
Location: Underhood junction block
Type: 30A Maxifuse
Feeds: Circuit 302
If the following system is operating normally, the fuse is most likely good.
- Power windows
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good go to the next item indicated on the Complaint-Condition Chart.

SUN Fuse
Location: Instrument panel junction block
Type: 15A Minifuse
Feeds: Circuit 580
If the following system is operating normally, the fuse is most likely good.
- Sunroof
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good go to the next item indicated on the Complaint-Condition Chart.