Operation CHARM: Car repair manuals for everyone.

Engine Mount - Measurements/Replacement Procedures: Overview

BULLETIN NO.: 01-T-30A

ISSUE DATE: June 2001

CATEGORY TYPE: Chassis-02

CATEGORY: Mounts

CORPORATION NO.: 01-06-01-016A

SUBJECT:
Service Information Regarding Upper Engine Mount Assembly

Due to changes in the Parts Requirement, this bulletin has been revised and supersedes bulletin 01-T-30, which should be discarded.

MODELS AFFECTED:
1992-2002 Saturn S-Series Vehicles

PURPOSE:
This bulletin contains new sag measurement and replacement procedures for upper engine mounts.

The first design upper engine mount (P/N 21012185) is being reintroduced into production and will be the only mount used to service all 1992-2002 Saturn S-Series vehicles. This first design mount requires longer engine front cover studs (P/N 21008003).

Refer to "Engine Mount Sag Measurement Procedures" in this bulletin to verify the need for upper engine mount assembly replacement. If replacement is required, refer to "Engine Mount Assembly Removal Procedure," "Front Cover Stud Installation Procedure," and "Engine Mount Assembly Installation Procedure" in this bulletin.





PARTS REQUIREMENTS:

CLAIM INFORMATION:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System for J1504 (Mount Torque Axis - Replace), or if another procedure is performed, refer to the appropriate Electronic Labor Time Guide for the correct Labor Operation Code and Time.

Loctite 242(R) (Part number 21485277) may be claimed as material using net item type "M." Claims received in the amount of $4.62 ($3.55 dealer cost plus 30% parts allowance) will be accepted. Claims exceeding the material amount will be returned with return reason 143 - material amount > maximum allowed. Retailer "B" authorization code will not override this return reason.





DISCLAIMER