Daytime Running Lamps

HAZARD Fuse
Location: Underhood junction block
Type: 10A Minifuse
Feeds: Circuit 1040B
If the following system is operating normally, the fuse is most likely good:
^ Hazard lamps
If the fuse is blown, determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good, go to the next item indicated on the Complaint-Condition Chart.

IGN3 Fuse
Location: Underhood junction block
Type: 30A Maxifuse
Feeds: Circuit 102A
If the following system is operating normally, the fuse is most likely good:
^ Generator
^ Cruise control
^ HVAC blower motor
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good, go to the next item indicated on the Complaint-Condition Chart.

IGN4 Fuse
Location: Underhood junction block
Type: 30A Maxifuse
Feeds: Circuit 202
If tbe following system is operating normally, the fuse is most likely good:
^ I/P cluster
^ Windshield wipers
^ Radio
^ Turn signals
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good, go to the next item indicated on the Complaint-Condition Chart.

IGN3 Fuse
Location: Instrument panel junction block
Type: 7.5A Minifuse
Feeds: Circuit 641 and RR DEFOG relay coil
If the following system is operating normally, the fuse is most likely good:
^ Generator
^ Power window
^ A/C
^ DRL
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good, go to the next item indicated on the Complaint-Condition Chart.

TURN Fuse
Location: Instrument panel junction block
Type: 7.5A Minifuse
Feeds: Circuit 139
If the following system is operating normally, the fuse is most likely good:
^ Flasher module
^ Turn signal bulbs
^ Cluster turn indicators
If the fuse is blown, determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good, go to the next item indicated on the Complaint-Condition Chart.