Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





1. Install control tube on new control base assembly.
2. Position control indicator assembly (PRND32) on control base assembly and install two shift indicator pop rivets with a rivet gun.





3. Install BTSI solenoid into control base assembly. Connect two plastic retainers to control base assembly.
4. Install control lever knob assembly and retainer.





5. Position control base assembly in vehicle and install three fasteners.
- Torque: 25 N.m (19 ft lbs.).





6. Connect the transaxle shift program switch (Perf/Norm) connector.
7. Install the control indicator assembly (PRND32) bulb.
8. Connect BTSI connector.
9. Connect two wiring harness retainers to control base assembly.





10. Install the park lock cable assembly into the control base assembly by completely seating two tabs.
11. Connect park lock cable assembly to control base assembly lever.





12. Install control cable assembly into control base assembly by completely seating two tabs.
13. Connect control cable assembly to control base assembly lever, and adjust control cable. (Refer to "Control Cable Assembly Adjustment.")
14. Check adjustment of park lock cable assembly. (Refer to "Park Lock Cable Adjustment" procedures.)
15. Install console. (Refer to "Console Installation" procedures.)
16. Enable the SIR system. (Refer to "Enabling the SIR System".)