Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 1998 >> SW2 L4-1.9L DOHC VIN 7 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Procedures >> Transaxle Range Switch >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation

1. Install switch to transaxle and install switch to case bolts. Do not tighten bolts at this time.
2. Install control lever-to-manual shift shaft.

NOTICE: If manual shift shaft is rotated excessively, internal damage to the transaxle range switch may occur.

3. Prevent the manual shift shaft from rotating by holding control lever while installing retaining nut.

Torque: 12 Nm (106 inch lbs.)

4. Install cable to control lever and adjust cable. (Refer to "Shift Cable Adjustment" in this manual.)
5. Before tightening transaxle range switch-to-case bolts, proceed to Adjustment procedure.

pro multis · About Operation CHARM