Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Installation
1. Place the boot on the shifter control assembly and clip the two plastic retainers in the front of the shifter control assembly.2. Clip the boot assembly onto the plastic retainer in the rear of the shifter control assembly.
3. Install console. Refer to "Console Installation" procedure.
4. Enable SIR system. (Refer to "Enabling the SIR System".)