Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Removal
1. Remove air induction system. [Double Overhead Cam (DOHC) shown, Single Overhead Camshaft (SOHC) similar.]
2. Disconnect negative battery cable from battery.
3. Disconnect positive battery cable from battery.
4. Remove hold-down retaining nut (1) and screws (2), and lift off battery hold-down retainer (3).
5. Lift the battery of vehicle, and place in a safe location.
6. Remove battery tray.
IMPORTANT: One bolt is located in the fender well.
7. Disconnect back-up light electrical connector.
8. Place transaxle in neutral.
9. Remove shift control housing retaining bolts.
10. Remove housing and gasket.