Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously

Seals

1. Fluid level/pressure too high.
2. Plugged vent or drain-back holes.
3. Damaged seal bore (scratched, burred, nicked).
4. Damaged or worn seal.
5. Improper installation.
6. Shaft seal surface scratched nicked or damaged.
7. Cracks in component.
8. Loose or worn bearing causing excess seal wear.