Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Refrigerant Pressure Sensor / Switch: Service and Repair

PRESSURE TRANSDUCER

REMOVAL




1. Disconnect pressure transducer electrical connector.




2. Using a back-up wrench to support refrigerant line, remove pressure transducer.

INSTALLATION

NOTE: Do not use PAG oil.

1. Lubricate pressure port O-ring with mineral oil.
2. Hand start pressure transducer onto pressure port.
3. Using a back-up wrench to support refrigerant line, tighten pressure transducer.

Torque: 7 N.m (62 in-lbs)




4. Connect pressure transducer electrical connector.