SIR System Service Precautions

- PERFORM THE SIR DIAGNOSTIC SYSTEM CHECK BEFORE AND AFTER DIAGNOSIS.
- DISABLE THE SIR SYSTEM WHEN WORKING ON OR NEAR THE SIR SYSTEM COMPONENTS.
- INSPECT SIR SYSTEM COMPONENTS AFTER AN ACCIDENT, EVEN IF AIR BAGS DID NOT DEPLOY
- USE SPECIAL CARE WHEN HANDLING OR STORING SIR SYSTEM COMPONENTS.
- FOLLOW GUIDELINES EXACTLY WHEN SHIPPING AN UNDEPLOYED INFLATOR MODULE.
- FOLLOW PROCEDURE STEPS EXACTLY WHEN PERFORMING SERVICE DEPLOYMENT OF A DRIVER OR PASSENGER INFLATOR MODULE.
- AVOID TOUCHING THE SDM TERMINALS TO PREVENT ELECTROSTATIC DISCHARGE DAMAGE.
- USE ELECTRICAL CONNECTOR ADAPTERS WHEN PROBING TERMINALS.
- USE APPROVED REPAIR KITS WHEN REPLACING WIRE TERMINALS.
- DO NOT USE A SELF POWERED TEST LAMP TO DIAGNOSE SIR SYSTEM.