Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2000 >> LS L4-2.2L VIN F >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Fluid Pressure Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fluid Pressure Sensor/Switch: Service and Repair

REMOVAL





1. Remove transaxle case side cover.
2. Remove TFP switch assembly bolts.
3. Remover TFP switch assembly from control valve body assembly. The TFP switch O-rings are reusable if not damaged, and should remain with switch assembly.

INSTALLATION
1. Inspect TFP switch assembly in order to verify the condition and correct location of pressure switch O-rings. If necessary, replace O-rings.
2. Install TFP switch assembly onto control valve body assembly, and install bolts.
Torque: 12 Nm (9 ft. lbs.)
3. Install transaxle case side cover.
4. Start engine, warm up transaxle, and check for leaks.
5. Check for proper fluid level.
pro multis · About Operation CHARM