Front Transaxle Mount (Automatic)

REMOVAL





1. Remove engine cooling fan attachment bolts.

CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST. TO HELP AVOID PERSONAL INJURY, PROVIDE SUPPORT TO THE OPPOSITE END OF THE VEHICLE THAT COMPONENTS WILL BE REMOVED FROM.

2. Raise vehicle on hoist.
3. Position engine cooling fan to allow access to the transaxle mount bolts.





4. Remove front transaxle mount through bolt.





5. Remove transaxle mount to transaxle attachment bolts.
6. Remove transaxle mount from vehicle.

INSTALLATION





1. Install transaxle mount into vehicle and tighten bolts.
Torque: 90 Nm (66 ft. lbs.)





2. Install transaxle mount through bolt and tighten.
Torque: 55 Nm (41 ft. lbs.)
3. Reposition cooling fan for installation.
4. Lower vehicle from hoist.





5. Install engine cooling fan attachment bolts.
Torque: 4 Nm (35 inch lbs.)