Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2000 >> LS2 V6-3.0L VIN R >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shifter A/T >> Service and Repair >> Control Assembly Boot/Control Indicator Bezel
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Assembly Boot/Control Indicator Bezel

REMOVAL





1. Pull control assembly boot down to disengage boot from knob.





2. Using a screwdriver, remove control lever knob retainer. Remove control lever knob.





3. Pull up on control boot until indicator bezel disengages from console.
4. Disconnect indicator bezel electrical connector. Remove bezel and boot.





5. Disengage control boot from indicator bezel from underside of bezel. Remove boot.

INSTALLATION

1. Install control boot into indicator bezel.





2. Install bezel and boot over shift lever and connect indicator bezel electrical connector. Snap bezel into console opening.





3. Install control lever knob and knob retainer.





4. Install control assembly boot onto knob so O-ring in top of boot is seated in groove on bottom of knob.
pro multis · About Operation CHARM