Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2000 >> LW1 L4-2.2L VIN F >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair >> Ignition Control Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module



Ignition Control Module Replacement

Removal Procedure






1. Turn the ignition OFF.
2. Disconnect the EI module harness connector.
3. Remove the EI module attachment screws and the EI module.

Installation Procedure






Important: Make sure the interconnect is lined up and the interconnect seal is in place before installing the attachment screws.

1. Install the EI module and the attachment screws. Tighten the EI module screws to 1.5 Nm (13 lb in).
2. Connect the module harness connector. Push in the connector until a click is heard, then pull back to confirm a positive engagement.
pro multis · About Operation CHARM