Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2000 >> LW1 L4-2.2L VIN F >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Output Shaft >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Output Shaft: Service and Repair

Tools Required
- SA9211T2 5th Gear Remover
- J41228 Stub Shaft Sleeve Installer

REMOVAL





1. Remove transaxle case side cover.
2. Remove snap ring from output axle shaft and discard.





3. Remove output axle shaft sleeve from output shaft using SA9211T2.

INSTALLATION





1. Use J41228 to install new sleeve on output axle shaft. Ensure that collet is located in snap ring groove when installing.





2. Install a new snap ring on output axle shaft.
3. Install transaxle case side cover.
4. Start engine, warm up transaxle, and check for leaks.
5. Check fluid level.
pro multis · About Operation CHARM