Glass Alignment

1. Remove trim panel.
2. Remove water deflector (carefully peel off).




3. Loosen rear most regulator attachment bolt.
4. For door glass adjustment, lower glass to 3/4 down position. Push glass rearward to seat in rear window run channel. Bring pressure against rear channel and torque rear most regulator attachment bolt.

Torque: 10 N.m (89 in-lbs.)

5. Run window to up and down positions to check operation. If binding exists, inspect all weatherstrips and adjust as necessary.

IMPORTANT: Replace water deflector if damaged.

6. Install water deflector.
7. Install trim panel.