Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2000 >> LW2 V6-3.0L VIN R >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Intake Manifold >> Service and Repair >> Front Intake Runner Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Intake Runner Replacement

TOOLS REQUIRED
- J-43914 Hose Clamp Pliers

REMOVAL




1. Disconnect negative battery cable.
2. Remove air cleaner inlet hose assembly from throttle body.

NOTE: Clamps are reusable if not damaged, do not discard.




3. Remove rubber boot hose clamps using J-43914 hose clamp pliers.




4. Remove intake runner mounting bolts.
5. Disconnect intake runner from rubber boots and remove intake runner.


INSTALLATION




1. Install intake runner on rubber boots.
2. Install intake runner mounting bolts.

Torque: 20 N.m (15 ft-lbs)

NOTE: Inspect hose clamps for damage, replace if damaged.




3. Install rubber boot hose clamps using J-43914 hose clamp pliers.




4. Install intake hose assembly.
5. Connect negative battery cable.
pro multis · About Operation CHARM