Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2000 >> LW2 V6-3.0L VIN R >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Tank Pressure Sensor >> Service and Repair >> Fuel Tank Pressure Sensor-1
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Tank Pressure Sensor-1




REMOVAL
The fuel tank pressure sensor is located on top of the fuel pump module cover.

1. Remove fuel filler pipe and fuel tank from vehicle.
2. Remove retaining nut.

NOTE: Avoid contact of any tool with the top surface of the fuel tank pressure sensor. If this surface is damaged, the sensor will require replacement.

3. Disengage sensor from the fuel pump module cover.

INSTALLATION

NOTE: To facilitate installation of the tank pressure sensor into its mounting boss on the fuel pump module cover lightly lubricate the multi-ribbed seal on the tank pressure sensor. A drop of clean engine oil is sufficient.

1. Install tank pressure sensor into the fuel pump module cover mounting boss.
2. Install retaining nut.

Torque: 2 N.m (18 in-lbs)

3. Install fuel tank and fuel filler pipe.
4. Perform the "Service Bay Diagnostic Test" for the evaporative emission system using the Scan tool. This test will verify the integrity of the vapor handling areas of the fuel system.
pro multis · About Operation CHARM