Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2000 >> SC1 L4-1.9L SOHC VIN 8 >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> Transaxle Assembly >> Unit Repair >> Disassembly >> Output Shaft
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Output Shaft





1. Use press to disassemble output shaft assembly. Place support under 1st driven gear.





IMPORTANT: Synchronizer hub and sleeves must be kept together as a matched set. Note spline alignment marks on hub and sleeve (indicated by the arrows). If alignment marks are not visible, put new marks on hub and sleeve before they are separated.





2. Remove output shaft ball bearing.
3. Remove 3rd/4th driven gear.
4. Remove 2nd driven gear.
5. Remove 2nd driven gear bearing.
6. Remove 2nd driven gear bearing race.
7. Remove 2nd driven gear blocker ring, blocker ring spring, and 1st/2nd synchronizer sleeve.
8. Remove 1st/2nd synchronizer hub.
9. Remove 1st gear blocker ring and spring.
10. Remove 1st driven gear.
11. Remove 1st driven gear bearing.
12. Remove 1st driven gear thrust washer.







pro multis · About Operation CHARM