Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Washer Solvent Container and Pump

REMOVAL




1. From under car, disconnect wiring harness from pump and remove lower fastener.




2. Remove upper solvent container fastener.

NOTE: Use caution when removing hoses from washer system components to avoid spilling washer fluid on painted surfaces.




3. Lift solvent container and remove fluid hose from pump, making sure to capture spilling solvent.
4. Remove solvent container from vehicle.




5. Empty fluid into holding container and remove pump from solvent container by pulling firmly on pump.

NOTE: Do not reuse washer fluid as debris may clog the system.

INSTALLATION




1. Install pump to solvent container.




2. Install fluid hose to pump.
3. Apply Loctite(R) 242 Threadlocker (or equivalent) to solvent container fasteners.
4. Install solvent container to vehicle and install upper fastener.




5. From under vehicle, connect wiring harness to pump and install lower fastener.
6. Fill solvent container with windshield washer solvent.
7. Check that pump operates properly.