Fog/Driving Lamp: Service and Repair
REMOVAL
1. Remove pushpin fasteners attaching fog lamp capsule to fog lamp capsule bracket. This can be done by reaching in through the large opening in front fascia.
2. Disconnect electrical harness from fog lamp.
3. Unscrew headlamp adjuster from capsule.
4. Remove fog lamp capsule.
INSTALLATION
1. Connect electrical harness to fog lamp capsule.
2. Position fog lamp capsule in fog lamp capsule bracket.
3. Screw headlamp adjuster into capsule.
4. Install pushpin fasteners attaching fog lamp capsule to fog lamp capsule bracket.