Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Door Window Regulator: Service and Repair



Rear Side Door Window Regulator Replacement

Removal Procedure






Notice: Be careful not to damage door sound insulator. Make sure all seals are properly positioned.

1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Coupe) ()Rear Side Door Trim Panel Replacement (Sedan/Wagon) (Panel Replacement) . The outer panel is removed in the illustration to show the location.
2. Remove the window. Refer to Rear Side Door Window Replacement () .
3. Disconnect the harness from the power regulator.
4. Loosen the regulator bolts and slide the regulator assembly out of the door.



Installation Procedure

1. Slide the regulator assembly into the door and position the regulator with the attachment bolts.
2. Install the window to the regulator assembly. Refer to Rear Side Door Window Replacement () .
3. Install the wiring harness connector to the motor.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Tighten the regulator assembly bolts.

Tighten the rear window regulator bolts to 10 N.m (89 lb in).

5. Check the regulator for proper operation.
6. Install the trim panel. Refer to Rear Side Door Trim Panel Replacement (Coupe) ()Rear Side Door Trim Panel Replacement (Sedan/Wagon) (Panel Replacement) .