Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2001 >> L100 L4-2.2L VIN F >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Control Arm >> Service and Repair >> Rear Upper >> Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Assembly

ASSEMBLY





1. Using bushing remover/installer KM-906-70, KM-906-33, KM-906-35, and KM-906-34 wedge to press in new damping bushing.

NOTICE: New nut and bolt must be used. Torque retention of old nut and bolt may not be sufficient.





2. Install control arm to rear suspension support using new nut and bolt. Hold the bolt stationary while tightening the nut.
Torque: Rear Suspension Control Arm-to-Rear Suspension Support: 90 Nm (66 ft. lbs.) + 60° - 75°

IMPORTANT: If installing a new crossmember, loosen the nut and bolt and re-torque to specification.

Torque: Crossmember Nut and Bolt: 90 Nm (66 ft. lbs.) + 60° to 75°

3. Install rear suspension support into vehicle.

pro multis · About Operation CHARM