Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2001 >> L100 L4-2.2L VIN F >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Seals and Gaskets >> Service and Repair >> Right
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Right

RIGHT SIDE AXLE SEAL

- TOOLS REQUIRED
- J41102 Axle Seal Installer

REMOVAL
1. Remove stub axle shaft from transaxle.

NOTICE: Be careful not to damage case bore with screwdriver.





2. Use a screwdriver to remove axle seal from case. If necessary, crush seal first in order to loosen seal from case.

INSTALLATION

IMPORTANT: Axle Seal Installer J41102 must be used in order to install seal correctly. The J41102-1 Axle Seal Installing Driver installs axle seal to a given depth.





1. Using J41102-1 Axle Seal Installing Driver, install a new right side axle seal into the transaxle case.

NOTICE: In order to prevent damage to shaft splines during vehicle operation, add grease (P/N 7847638) to splines on stub shaft.





2. Install stub axle shaft and RH axle in transaxle.
3. Check fluid level.
4. Inspect shaft and seal for fluid leaks.
pro multis · About Operation CHARM