Instrument Panel Fuse Block - Both

REMOVAL

Locations View:

1. Disconnect negative battery cable.
2. Disconnect positive battery cable.
3. Remove nuts holding the fuse block in place. (Two nuts towards front of vehicle, one rearward.)
4. Remove inlines that are attached to the fuse block bracket with rose buds. (Left I/P fuse block-body to I/P inline and premium sound system inline. Right I/P fuse block-body to IP inline and CD inline.)

NOTE: Take care when removing mimes. The rose buds will be re-used on the replacement fuse block.

5. Remove I/P connector.
6. Remove body connector.

INSTALLATION

Locations View:

1. Install body connector.
2. Install I/P connector.
3. Align fuse block on the three studs (2 forward, 1 rearward).
4. Install nuts.
5. Install inline connectors to fuse block bracket. (Body to UP mimes go to the outer rose bud attachment holes.)
6. Connect positive battery cable.
7. Connect negative battery cable.