Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2002 >> LW300 V6-3.0L VIN R >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair >> Temperature Cable
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Temperature Cable

REMOVAL




1. Remove control head.
2. Remove R/H console closeout panel.

CAUTION: HEATER CORE PIPES MAY BE HOT!

3. Remove cable from module retaining clip using first two fingers to pull outward on cable while using thumb to spread retaining clip.




4. Remove cable from temperature door lever by squeezing end of pin and pulling cable eyelet outward.

INSTALLATION




1. Route new cable in through control head opening in I/P. Cable housing flag goes to control head end.
2. Guide cable around outside of I/P support brace.

IMPORTANT: Do not install cable housing into retaining clip at this time.

3. Install cable eyelet onto temperature door lever pin.
4. Install control head.
pro multis · About Operation CHARM