Ignition Coil: Service and Repair

REMOVAL




1. Disconnect negative battery cable.
2. Remove upper intake manifold runner. (Refer to "Intake Manifold Runner Replacement").
3. Remove ignition coil electrical connector.
4. Remove ignition coil module.
5. Remove gasket.

INSTALLATION




1. Install new gasket.
2. Install ignition coil module.
3. Connect ignition coil electrical connector.
4. Install upper intake manifold runner. (Refer to "Intake Manifold Runner Replacement").
5. Connect negative battery cable.

Torque:
Battery Terminal Bolts: 17 N.m (13 ft-lbs)