Antenna: Service and Repair

ANTENNA MAST AND BRACKET ASSEMBLY

REMOVAL




1. Disconnect antenna lead from antenna base mating socket located by the passenger's feet area.
2. Use a wrench to loosen antenna mast.
3. Remove antenna mast.
4. Remove right fender.




5. Remove fasteners from antenna bracket assembly.
6. Remove antenna bracket assembly from vehicle.

INSTALLATION




1. Position antenna bracket assembly to vehicle.
2. Route antenna connector through spaceframe opening and install coax grommet to body opening.
3. Route antenna base/cable to antenna lead and connect antenna lead to antenna base mating socket.
4. Install fasteners to secure antenna bracket assembly to vehicle.

Torque:
Antenna Bracket-to-Fender Fasteners: 10 N.m (89 in-lbs)

5. Install and tighten antenna mast to antenna base.
6. Torque the antenna mast down with a wrench.

Torque:
Antenna Mast-to-Antenna Base: 10 N.m (89 in-lbs)




7. Install right fender.