Activation Of The Theft Deterrent Feature
Vulnerable (Unarmed) System: Activation Of The Theft Deterrent FeatureThe AM/FM tape and the AM/FM/tape/CD radios will be in the vulnerable state if the radio is new, remanufactured, or if the theft deterrent feature has been deactivated. To activate the theft deterrent feature, the following steps need to be followed:
1. Turn the ignition On.
2. Turn the radio power Off.
3. Press and hold preset buttons 5 and 6, at the same time, for five seconds. The radio display will show "----".
4. Have the customer select a four digit code. (Suggest a number that is familiar to them such as the beginning of the their phone number, their birth date, or their address.)
5. Enter the four digit code by using the
5.1 Press the down arrow side of
5.2 Press the up arrow side of
5.3 Press the down arrow side of
5.4 Press the up arrow side of
6. Push the AM/FM button to store the code once the four digit code has been entered correctly.
7. The display will show REP (repeat) requesting verification that the code was entered correctly.
8. Again, enter the same four digit code by using the
8.1 Press the down arrow side of
8.2 Press the up arrow side of
8.3 Press the down arrow side of
8.4 Press the up arrow side of
9. Push the AM/FM button to store the code once you are finished reentering your personal four digit code
10. If everything has been entered correctly, the display will indicate that the radio is secure by displaying SEC. The radio will then return to normal operation, but will now be in the Armed Mode
If the radio displays "Err1", "Err2", or "LOCK", then the radio is already in the secure state and is armed with a different code other than the code that was entered. Proceed to the appropriate part of this Theft Deterrent to deactivate the system if deactivation is desired.