For AM/FM Tape & AM/FM Tape/CD Radios

If an error is made while the customer is using the radio, an error message will momentarily appear on the display alerting the customer that an error has been made. The DTC mode in the OBD is available to check which error codes have been set and how may times each error code has been set.
1. Press the RCL button one time to display "E- -01", then use the SEEK rocker button to tab through all of the possible error codes (E- -01,..., E- -09). At each error code, use the RCL button to display the number of times the error has occurred. Press the AM/FM button to return back to display the error code. Once the error code is again displayed, press the SEEK rocker button to check another error code.
2. When you are finished checking the error codes, press the AM/FM button until DTC is again on the display.
Following is the list of all possible error messages along with probable causes and procedures to correct the problem.