Rear Side Door Stationary Window Replacement (Sedan/Wagon)

Rear Side Door Stationary Window Replacement (Sedan/Wagon)

Removal Procedure




1. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (Coupe) (Rear Side Door Trim Panel Replacement (Coupe))Rear Side Door Trim Panel Replacement (Sedan/Wagon) (Rear Side Door Trim Panel Replacement (Sedan/Wagon)).
2. Partially remove the upper door frame inner seal at the location of the stationary window.
3. Peel back the water deflector at the bolt access hole and remove the bolt from the stationary window.
4. Remove the stationary window.

Installation Procedure

Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the stationary glass and fasten with the bolt.

Tighten the door stationary glass (Sedan/Wagon) to 11 Nm (97 lb in).

2. Replace the water deflector at the access hole location.
3. Install the upper door frame inner seal, sliding it down around the window.
4. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (Coupe) (Rear Side Door Trim Panel Replacement (Coupe))Rear Side Door Trim Panel Replacement (Sedan/Wagon) (Rear Side Door Trim Panel Replacement (Sedan/Wagon)).