Steering Column Shroud

STEERING COLUMN SHROUD

IMPORTANT: LHD shown; RHD similar.

REMOVAL





1. Gently pry edges of ignition lock bezel with a blunt tool and separate from lower shroud.





2. Remove steering column shroud fasteners and remove steering column upper shroud.
3. Remove steering column lower shroud.

INSTALLATION

1. Position steering column lower shroud to steering column.
2. Secure steering column upper and lower shrouds with shroud fasteners.
Torque: Steering Column Shroud Fasteners: 1.5 Nm (13 inch lbs.)
3. Install ignition bezel.
3.1. Align peg of bezel with the cut-out in lower shroud.
3.2. Snap into place.