Cutting Keys

The Saturn approved key cutting tool requires adapter kit SA9703B-3. The kit consists of a 10-position spacing plate (only positions two through ten are used) and a key insert. To install adapter kit to key cutting tool, follow steps in instruction manual provided with key cutting tool.

The customer information card or the retailer records will show the key code as a five-digit alpha-numeric code. To determine the actual cut sequence of the key from this code, look up the code in the appropriate Key Code book.

The cut sequence will be shown to the right of the code listing. The ignition cut sequence should be used to cut new keys, as it has all of the cuts necessary for the key to work properly in all the locks on the vehicle.