Fog Lamp Aiming

Using an adjustment screen of at least 4 m (13 ft) wide and 2.5 m (8.2 ft) high, square vehicle to the screen and position so that the fog lamps are 7.6 m (25 ft) from screen. The weight of the vehicle driver and a 1/2 tank of fuel must be included in adjustment procedure to assure accurate adjustment.

Make sure the vehicle is on a level surface. Measure form centerline of fog lamp to ground. Adjust fog lamp so that the top of fog lamp beam is located 101.6 mm (4 in) below centerline of the fog lamp lens when viewed on adjustment screen.

Vertical beam adjustment is accomplished by turning the adjustment screw located in the fascia log lamp opening. The fog lamp does not have any horizontal beam adjustment.