Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Resonator: Service and Repair



AIR CLEANER OUTLET RESONATOR REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the IAT sensor harness connector.
2. Loosen the air cleaner assembly fresh air duct to resonator clamp.




3. Remove the push-pin fastener from the air outlet resonator/duct assembly to support bracket.
4. Loosen the resonator to throttle body clamp.
5. Disconnect the air cleaner assembly fresh air duct from the resonator.
6. Remove the air outlet resonator from the throttle body.

INSTALLATION PROCEDURE




1. Install the air outlet resonator to the throttle body.
2. Connect the fresh air duct to the air outlet resonator.
3. Tighten the air outlet resonator to throttle body clamp.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the clamp to 5 N.m (44 lb in).

4. Align the air outlet resonator to the bracket and install the push-pin fastener.




5. Connect the air cleaner assembly fresh air duct to the air outlet resonator.

Tighten the clamp to 5 N.m (44 lb in).

6. Connect the IAT sensor harness connector.