31. Driven Sprocket Support Assemble

DRIVEN SPROCKET SUPPORT ASSEMBLE
1. In order to aid in assembly, lubricate seal with transaxle fluid.





2. Assemble 2nd clutch piston and seal assembly into driven sprocket support.
3. Assemble 2nd clutch spring and retainer assembly into driven sprocket support.





4. Compress 2nd clutch spring assembly. Use Clutch Spring Compressor Adapter J41232 and Clutch Spring Compressor J23327.
5. Assemble 2nd clutch spring retainer snap ring.
6. Remove J41232 and J23327.





7. Assemble new seal rings onto driven sprocket support.