Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2003 >> L200 L4-2.2L VIN F >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Transaxle Assembly Assembly >> 6. Transaxle Oil Cooler Line Seals Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

6. Transaxle Oil Cooler Line Seals Installation

TRANSAXLE OIL COOLER LINE SEALS INSTALLATION

NOTICE: Hand start and tighten servo cover bolts evenly to prevent damage to servo cover bore.





1. Using a Torx socket remove the oil cooler line assembly stud from the transaxle case.
2. Place a new transaxle cooler line seal in the case bore.
3. Install oil level control valve into transaxle case.

IMPORTANT: When installing new cooler line seals, it is important to have the installing plunger of the tool centered in the transaxle's bore. If the plunger is not centered, the seal may be installed improperly and a leak would occur.

4. Install Cooler Line Seal Installer J41239 on transaxle case at the cooler line bracket bolt hole.
5. Press new transaxle cooler line seal in by tightening the seal pressing bolt on the tool until the seal bottoms Out in the case bore.
6. Repeat steps 2-5 for the second cooler line seal.
pro multis · About Operation CHARM