Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2004 >> ION L4-2.0L SC VIN P >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Manifold Pressure/Vacuum Sensor >> Service and Repair >> Manifold Absolute Pressure (MAP) Sensor Replacement (SCIP)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Manifold Absolute Pressure (MAP) Sensor Replacement (SCIP)

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REPLACEMENT (SCIP)

REMOVAL PROCEDURE




1. Disconnect the supercharger inlet pressure (SCIP) sensor harness connector.
2. Remove the SCIP sensor (1) from the supercharger.

IMPORTANT: If the SCIP sensor seal is damaged, the SCIP sensor must be replaced.

3. Inspect the seal for damage.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.

IMPORTANT: Use the new SCIP sensor seal provided with the new SCIP sensor.




1. Install the SCIP sensor (1) into the intake manifold.

Tighten the bolt to 10 N.m (89 lb in).

2. Connect the SCIP sensor harness connector.
pro multis · About Operation CHARM