Rear Cover Replacement

Rear Cover Replacement
Removal Procedure
1. Remove the left front wheel.
2. Drain the transaxle fluid.





3. Remove the rear cover bolts.
4. Remove the rear cover.
5. Remove the rear cover gasket and discard.

Installation Procedure





1. Clean the gasket surfaces. Mating surfaces should be clean and dry.
2. Install the rear gasket cover.

3. Notice: Refer to Fastener Notice in Service Precautions.

Install the rear cover and bolts.
Tighten the rear cover bolts to 24 Nm (18 ft. lbs.).
4. Fill the transaxle to the proper fluid level.
5. Install the left front wheel.