Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2004 >> ION L4-2.2L VIN F >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair >> Input Shaft Speed Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Input Shaft Speed Sensor Replacement

Input Shaft Speed Sensor Replacement

Removal Procedure





1. Disconnect the wiring harness from the input speed sensor.

Important: Do not damage the input speed sensor or transaxle case.

2. Remove the input speed sensor bolt/screw (72).
3. Remove the input speed sensor (73), and the input speed sensor O-ring (71).
4. Inspect the input speed sensor for damage.

Installation Procedure





1. Apply automatic transmission fluid to the new input speed sensor 0-ring seal (71).
2. Install the new input speed sensor 0-ring seal (71) onto the input speed sensor (73).
3. Install the input speed sensor (73) into the transmission case assembly (17).

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the input speed sensor bolt (72).
^ Tighten the input speed sensor bolt (72) to 4.5 Nm (40 inch lbs.).
pro multis · About Operation CHARM