Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2004 >> ION L4-2.2L VIN F >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Seals and Gaskets >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seals and Gaskets: Service and Repair

Front Wheel Drive Shaft Oil Seal Replacement
^ Tools Required
- J 44385 Differential Bearing Race and Seal Installer
- J 7079-2 Non-threaded Driver Handle
- SA9133T Axle Seal Puller

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the front wheel and tire assemblies.
3. Remove the wheel driveshaft.
4. Use the SA9133T in order to remove the seal.
5. Inspect the seal bore for nicks or for burrs. Clean the bore with a fine grade sandpaper, if necessary.

Installation Procedure





1. Use the J 44385 and the J 7079-2 in order to install a new seal. Ensure that the seal is seated flush to the outer bore area.
2. Lubricate the seal with Dexron-III transmission fluid Saturn P/N 21019223.
3. Install the wheel driveshaft.
4. Install the front tire and wheel assemblies.
5. Lower the vehicle.
pro multis · About Operation CHARM