Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2004 >> L Series L4-2.2L VIN F >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Wheel Speed Sensor Replacement - Rear
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Speed Sensor Replacement - Rear

Wheel Speed Sensor Replacement - Rear

Removal Procedure

Important: The rear wheel speed sensors and rings are integral with the hub and bearing assemblies.

If a speed sensor or a ring needs replacement, replace the entire hub and bearing assembly.

1. Raise and support the vehicle on a suitable hoist. Refer to Vehicle Lifting.
2. Remove the rear tire and wheel assembly.





3. Disconnect the electrical connector from the rear wheel speed sensor.
4. Remove the hub and bearing assembly.

Installation Procedure
1. Install the hub and bearing assembly to the vehicle.





2. Connect the electrical connector to the rear wheel speed sensor.
3. Install the wheel and tire assembly.
4. Lower the vehicle.
5. Turn the ignition switch to the ON position, with the engine OFF.
6. Perform the Diagnostic System Check - ABS.
pro multis · About Operation CHARM