Engine Lubrication: Service and Repair

Oil Baffle Replacement

Removal Procedure

Caution: Refer to Vehicle Lifting.





1. Raise and support the vehicle.
2. Drain the engine oil.
3. Remove the oil pan.





4. Remove the oil pan baffle bolts.
5. Remove the oil pan baffle.
6. Clean the following components:
^ The oil pan.
^ The oil pan housing.
^ The gasket surfaces.

Installation Procedure
1. Install the oil pan baffle.

Notice: Refer to Fastener Notice in Service precautions.





2. Install the oil pan baffle bolts.
Tighten
Tighten the oil pan baffle bolt L81 to 8 N-m (71 lb in).

Important: Application of the RTV and oil pan alignment is critical.





3. Install the oil pan.
4. Lower the vehicle.
5. Refill the engine with 4.73 L (5 qt) of oil.