Wiper Motor Replacement
WIPER MOTOR REPLACEMENTREMOVAL PROCEDURE
1. Remove the wiper motor module.
2. Remove the wiper motor to crank nut.
3. Remove the two wiper motor to wiper module frame bolts.
4. Remove the wiper motor from the wiper module.
INSTALLATION PROCEDURE
1. Position the wiper motor to the wiper module.
2. Install the two wiper motor to wiper module frame bolts.
NOTE: Refer to Fastener Note in Service Precautions.
Tighten the bolts to 8 N.m (71 lb in).
3. Install the wiper motor crank arm and crank arm nut.
Tighten the screws to 14 N.m (10 lb ft).
4. Install the wiper motor module.