Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2004 >> VUE 2WD V6-3.5L VIN 4 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Manifold Pressure/Vacuum Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Manifold Pressure/Vacuum Sensor: Service and Repair

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Turn the ignition OFF.
2. Disconnect the manifold absolute pressure (MAP) sensor harness connector.
3. Remove the MAP sensor attachment screw and remove the MAP sensor and O-ring (6).

INSTALLATION PROCEDURE




1. Make sure the MAP sensor mounting surface is clean. Install the MAP sensor with the new O-ring and attachment bolt (6).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the manifold absolute pressure sensor screw to 4 N.m (35 lb in).

2. Connect the MAP sensor harness connector. Push the connector in until the lock position is felt, then pull back to confirm engagement.

pro multis · About Operation CHARM