Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2004 >> VUE 2WD V6-3.5L VIN 4 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair >> Input Speed Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Input Speed Sensor Replacement

Input Speed Sensor Replacement

Removal Procedure





1. Raise and support the vehicle.
2. Disconnect the wiring harness from the input speed sensor.

Important: Do not damage the input speed sensor or transaxle case.

3. Remove the input speed sensor bolt/screw.
4. Remove the input speed sensor, and the input speed sensor O-ring.

Installation Procedure





1. Apply automatic transmission fluid to the new input speed sensor O-ring seal.
2. Install the new input speed sensor O-ring seal onto the input speed sensor.
3. Install the input speed sensor into the transmission case assembly.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the input speed sensor bolt.
- Tighten the input speed sensor bolt 12 Nm (87 inch lbs.).
5. Connect the wiring harness to the input speed sensor.
6. Lower the vehicle.
pro multis · About Operation CHARM