Wheel Speed Sensor Replacement - Rear
Wheel Speed Sensor Replacement - RearRemoval Procedure
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the brake shoes.
4. Disconnect the wheel speed sensor electrical connector.
5. Remove the wheel speed sensor bolt.
6. Remove the wheel speed sensor through the drum brake backing plate.
Installation Procedure
1. Install the wheel speed sensor through the drum brake backing plate to the wheel bearing/hub assembly.
2. Seat the wheel speed sensor harness grommet into the backing plate.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the wheel speed sensor mounting bolt.
^ Tighten the bolt to 8 Nm (71 inch lbs.).
4. Connect the wheel speed sensor electrical connector.
5. Install the brake shoes.
6. Install the tire and wheel assembly.
7. Lower the vehicle.