Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2004 >> VUE AWD L4-2.2L VIN D >> Repair and Diagnosis >> Maintenance >> Wheels and Tires >> Wheel Hub >> Service and Repair >> Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front

Wheel Bearing/Hub Replacement - Front

Removal Procedure





1. Remove the front brake rotor.





2. Disconnect the wheel speed sensor electrical connector, if equipped.





3. Remove the wheel speed sensor electrical connector form the connector bracket.





4. Remove the front wheel drive shaft spindle nut.





5. Support the wheel drive shaft with heavy mechanics wire or equivalent.
6. Remove and discard the wheel bearing/hub mounting bolts.
7. Remove the wheel bearing/hub assembly from the steering knuckle.

Installation Procedure

Notice: Refer to Fastener Notice in Cautions and Notices.





1. Install the wheel bearing/hub assembly to the steering knuckle.
2. Install the wheel bearing/hub mounting bolts.
^ Tighten the bolts to 130 Nm (96 ft. lbs.).





3. Install the wheel drive shaft spindle nut.
^ Tighten the nut to 205 Nm (151 ft. lbs.).





4. If equipped, install the wheel speed sensor electrical connector to the mounting bracket.





5. Connect the wheel speed sensor electrical connector.





6. Install the front brake rotor.
pro multis · About Operation CHARM