22. Regulator Assembly Removal

Regulator Assembly Removal





1. Remove the 7 regulator valve body assembly (4430) mount bolts (411), (412), (413) and (414).





2. Remove the 2 regulator spacer plate locating pins (401).
3. Remove the stator shaft and torque arm assembly (431).
4. Remove the stator shaft and torque arm stop pin (405).
5. Remove the spacer plate (400).
6. Remove the stator shaft O-ring seal (406) from the stator shaft (404). Replace the stator shaft O-ring seal when assembling the transmission.